NixieTube

Shining the beautiful and transparent VFD display tube IV-27M

I lit up the IV-27M, which I bartered with a retro display tube enthusiast in Ukraine. For more information about the VD...

2021.05.12

Rose

Electronics

Made a compact DCDC converter that generates high voltage for Nixie tubes from 5V

We have completed a DCDC converter that generates the high voltage required for Nixie tubes from 5V. Here's a look at th...

2021.05.02

Rose

Electronics

I turned on the VFD indicator tube IV-6

I lit up a VFD indicator tube IV-6 that I bartered with a retro indicator tube enthusiast in Ukraine. Here are the detai...

2021.05.01

Rose

Electronics

A retro display tube enthusiast from Ukraine and I exchanged my Nixie tube clock kit for his display tube!

I was contacted by a retro display tube enthusiast from Ukraine. He said he was very interested in alarm clock style Nix...

2021.04.28

Rose

Electronics

Trying a different step-up circuit to see if a small high current transformer can be used as a power supply for Nixie tubes.

Last time I tried connecting it to the NixieDCDC voltage boost circuit, but it didn't boost the voltage properly, so I t...

2021.04.27 2021.04.28

Rose

Electronics

I got a small high-current transformer, so I experimented to see if I could use it to power a Nixie tube.

I found a transformer that can carry three times more current than the one used in the NixieDCDC, so I experimented to s...

2021.04.27

Rose

Electronics

Added thermometer to NTP calendar & clock of Canon Canola L1211 display

I added a thermometer to an indicator that was manufactured during the short period before the transition from Nixie tub...

2021.04.25

Rose

Electronics

The NTP calendar & clock was completed by controlling the display of Canon Canola L1211 with ESP32.

Making the clock with a Canon Canola L1211 display unit I would like to make the clock, since the work I have done until...

2021.04.14

Rose

Electronics

Canon Canola L1211's display unit controlled by ESP32 to display a single digit number.

Each segment of the display unit of Canon Canola L1211 can be turned on and off by ESP32. For more information about JRC...

2021.04.14

Rose

Electronics

GPS Nixie tube clock that looks like an alarm clock

I assembled two Nixie tube clocks with GPS in the form of alarm clocks. In this article, we are assembling the product h...

2021.03.17 2021.04.18

Rose

Electronics

How to make an alarm clock-like nixie tube clock(4/4) WiFi Settings

In this article, you can learn how to make this ??? product here. The alarm clock-like Nixie Tube Clock has a built-in G...

2020.11.05 2021.04.18

Rose

Electronics

How to make an alarm clock-like nixie tube clock(3/4) Remodeling of the alarm clock

Now that the PCB is complete, I'd like to modify the alarm clock to incorporate the board and assemble an alarm clock-st...

2020.11.05 2021.04.18

Rose

Electronics

How to make an alarm clock-like nixie tube clock(2/4) Soldering and Assembly of Main Board

Since the surface-mounted components of the main board have already been mounted, only the DIP-style components are moun...

2020.11.05 2021.04.18

Rose

Electronics

How to make an alarm clock-like nixie tube clock (1/4) Nixie Tube PCB Soldering

This is an example of how to make an alarm clock-like Nixie-tube clock, Part 1. In this article, you can learn how to ma...

2020.11.05 2021.04.18

Rose

Electronics

Until the K155ID1 is controlled by the ESP 32 and the 2 digit Nixie tube IN - 12B is dynamically lit.

I have the substrate for the nixie tube and the K1551 ID 1 for the control IC, I want to control the nixie tube using ES...

2020.11.03 2021.03.17

Rose

Electronics