Electronics

I received the CO2 laser cutter Etcher Laser Pro, so I set it up and tried cutting it.

The EtcherLaserPro that I had ordered has arrived. I set it up and did some test cutting, so here is how I set it up and...

2021.01.01

Rose

ElectronicsLeaser Cutter

How to make a Christmas wreath kit with glittering LEDs

Christmas wreath made from printed circuit boardsI designed a Christmas wreath on a printed circuit board using the gold...

2020.12.11

Rose

ElectronicsInstruction Manual

Glittering PCB Art Christmas Wreath

PCB ART for Glittering LEDIf I ask what a PCB is, most people will think of a board with thin wires and electronic compo...

2020.12.11

Rose

Electronics

I bought the Etcher Laser Pro after comparing it with the CO2 laser cutter Beamo

Website from SMART DIYs Etcher Laser ProLaser cutterThe laser cutter is a device that allows you to burn off or scorch t...

2020.11.10

Rose

ElectronicsUncategorized

Make the large 8x8 LED dot matrix even brighter

Hi, Konanii here.It's Halloween today.I made a Large 8×8 LED Dot Matrix before.The resistor attached to limit the curren...

2020.11.10

Rose

Electronics

Made a large 8x8 LED dot matrix

Hi, I'm kohanii.I thought I could make an LED dot matrix this time, using a board I made in the past that could mount an...

2020.11.09 2020.11.10

Rose

Electronics

How long I get the PCB from PCBWay? Mounting components on electronic paper control PCBs.

We recently ordered a MAX10 FPGA board and an e-paper control board from PCBWay. To our surprise, the board we ordered w...

2020.11.05

Rose

Electronics

Learn how to order boards from PCBWay. I ordered a MAX10 FPGA board and an electronic paper control board.

I use PCBWay a lot because of the quality and fast delivery. This time, I ordered an FPGA board and a slightly more comp...

2020.11.05

Rose

Electronics

Cool and Cute LEDs at MakerFaireTokyo2020

Maker Fair TokyoI went to Maker Faire Tokyo, a festival for craftsmen.It's a very fun event that involves electronics, m...

2020.11.05

Rose

Electronics

I repaired my cracked iPhone's LCD by myself, using a recycled panel LCD with beautiful colors.

My iPhone's LCD is brokenI was using my iPhone 5S as a sub, but when I put it in my bag, the LCD was cracked before I kn...

2020.11.05

Rose

Electronics

I bought the 858D hot air gun, which can easily remove multi-pin devices that cannot be removed by a soldering iron.

Hot Air GunsThe 858D is a hot air gun with a thinner tip than a heat gun and temperature control.AliExpress.com Product ...

2020.11.05

Rose

Electronics

How to make an alarm clock-like nixie tube clock(4/4) WiFi Settings

In this article, you can learn how to make this 👇👇👇 product here.The alarm clock-like Nixie Tube Clock has a built-in GP...

2020.11.05 2021.04.18

Rose

Electronics

How to make an alarm clock-like nixie tube clock(3/4) Remodeling of the alarm clock

Now that the PCB is complete, I'd like to modify the alarm clock to incorporate the board and assemble an alarm clock-st...

2020.11.05 2021.04.18

Rose

Electronics

How to make an alarm clock-like nixie tube clock(2/4) Soldering and Assembly of Main Board

Since the surface-mounted components of the main board have already been mounted, only the DIP-style components are moun...

2020.11.05 2021.04.18

Rose

Electronics

How to make an alarm clock-like nixie tube clock (1/4) Nixie Tube PCB Soldering

This is an example of how to make an alarm clock-like Nixie-tube clock, Part 1.In this article, you can learn how to mak...

2020.11.05 2021.04.18

Rose

Electronics

I made a 7-segment LED on a 3D printer. This is a great way to make an original one!

I wanted to make a 7-segment LED with a 3D printer.ModelingModel the resin part of a 7 segment LED in Blender. I modeled...

2020.11.05

Rose

Electronics

How to make a game of "candle panic" by hastily lighting a dying fire.

"Candle panic" is a special circuit that also uses LED as a light sensor allows you to enjoy the experience of lighting ...

2020.11.05

Rose

Electronics

PCBgogo has a fast job! The "Candle Panic" game board using the "glowing light sensor" is now complete!

Create PCB with PCBgogoI recently found that the candle panic game I made with the "glowing light sensor" worked fine on...

2020.11.05

Rose

Electronics

Let's try "candle panic game" that use a "glowing light sensor".

"Glowing Light Sensor"I recently created a circuit that can be used as both a light-emitting device and a light sensor, ...

2020.11.05

Rose

Electronics

Whether LEDs can generate electricity like solar cells.

Principle of solar cells and LEDsSolar CellsSolar cells are made of two types of semiconductors, n-type and p-type, bond...

2020.11.05

Rose

Electronics

Experiment to make the LED a "glowing light sensor"

The other day, I experimented with the use of LEDs as solar cells, taking advantage of the fact that the basic semicondu...

2020.11.05

Rose

Electronics

Mounted the components on the PCB of Nixie DCDC, a step-up DCDC converter for Nixie tubes.

NixieDCDCNixie tubes, which glow beautifully, require a higher voltage of about 175V or more to make them glow. I've mad...

2020.11.05

Rose

Electronics

Assembled an alarm clock style Nixie tube table clock using IN-16 Nixie tube

I recently mounted components on the PCB that arrived from Fusion PCB.In this article, I would like to modify an alarm c...

2020.11.05

Rose

Electronics

The Nixie tube clock PCB that I had ordered from FusionPCB arrived and I mounted the parts!

I had previously designed an alarm clock type Nixie tube clock substrate and ordered a PCB from FusionPCB.How many days ...

2020.11.05

Rose

Electronics

Making an Alexa compatible dimmable ceiling light using ESP32 and Daiso’s LED fluorescent light-installation

Previously, we have completed the circuitry and software.This time, I would like to modify and install the ceiling light...

2020.11.05

Rose

Electronics

Making an Alexa compatible dimmable ceiling light using ESP32 and Daiso's LED fluorescent light-Program

Last time, I created a circuit for an Alexa-compatible dimmable ceiling light.In this article, I'd like to create a prog...

2020.11.05

Rose

Electronics

Making an Alexa compatible dimmable ceiling light using ESP32 and Daiso's LED fluorescent light - Circuit

I want an Alexa-enabled ceiling lightWhen I go to bed at night, I use the remote control because I can't be bothered to ...

2020.11.05 2020.11.07

Rose

Electronics

Nixie tube IN-12B and NIS-1 give off a retro glow by making a 180V boost circuit.

I previously opened a dot-shaped Nixie tube INS-1 and a number-displays Nixie tube IN-12B, that arrived from Ukraine.Thi...

2020.11.05 2020.11.07

Rose

Electronics

Modify a old retro clock with a Nixie tube to a more retro and latest NTP clock

In a recent experiment, I found that the Nixie tube can be controlled by ESP32, so I applied it to I'm going to make a c...

2020.11.05 2020.11.07

Rose

Electronics

Install Chinese USB Blaster drivers to windows 10

USB BlasterI'm building my own evaluation board for the Intel CPLD MAV V 5M160Z.I haven't finished it yet because I don'...

2020.11.05 2020.11.07

Rose

Electronics

Display a color bar by generating a video signal with Intel MAX V CPLD 5M160 nano

5M160nano5M160nano is an evaluation board equipped with 5M160 of Intel MAX V series CPLD. This is a very convenient CPL...

2020.11.03 2020.11.07

Rose

Electronics

Intel MAX V CPLD "5M160nano" board details

You can buy this item here 👇👇👇 .MAX V CPLD 5M160 nano boardThis is an experimental board equipped with Intel MAX V serie...

2020.11.03 2020.11.07

Rose

Electronics

Design PCB for Nixie tube clock

Nixie Tube Clock with AlarmI once made a nixie tube clock that looks like an alarm clock, with a nixie tube built into a...

2020.11.03 2020.11.07

Rose

Electronics

Digital microscope connect to Mac with Full-HD HDMI Capture!

USB HDMI CaptureThis is a capture cable that can capture 1080p by utilizing the high-speed transfer of USB3.0. (It is US...

2020.11.03 2020.11.07

Rose

Electronics

MAX V CPLD "5M160nano" board and stencil that I ordered from PCBWay is perfect !

To make experimentation more convenient, the MAX V CPLD board that sticks into the breadboard "5M160nano" I designed and...

2020.11.03 2020.11.07

Rose

Electronics

Using Amazon Echo's Alexa and ESP32 to adjust the brightness of the lighting with my voice

I used ESP32 and did a basic experiment to see if I could turn on and off the light and adjust the brightness by giving ...

2020.11.03 2020.11.07

Rose

Electronics

Ordered on PCBWay, the PCB arrived very quickly!!

The other day, I ordered an aluminum substrate for the first time on PCB Way. It is PCB designed to make LED lighting w...

2020.11.03 2020.11.07

Rose

Electronics

Redesigned the MAX V 5M160 CPLD's swittic evaluation PCB.

Previously, I made a MAX V 5M160 CPLD board that sticks into the breadboard.After completion, I used it for a while and ...

2020.11.03

Rose

Electronics

Challenge to design aluminum substrate to make high color rendering. Introducing the procedure from the first PCB Way registration to ordering!

High color rendering LEDI will use the high color rendering LEDs sold by DigiKey.Here are the specifications.Power class...

2020.11.03

Rose

Electronics

The ESP32-WROVER and MAX V CPLD were mounted on the experimental e-paper board.

Last time I designed the substrate using KiCad and ordered the PCB from JLCPCB. Now that the PCB has arrived, we want t...

2020.11.03 2020.11.07

Rose

Electronics

Making an electronic paper experimental PCB on which ESP32-WROVER and MAX V CPLD are mounted.

High speed drawing with ESP32-WORVER and CPLDIn the previous experiment, by using ESP32-WORVER for the microcomputer, th...

2020.11.03

Rose

Electronics

Successful operation of the ESP32-WROVER-B and MAX V CPLDs on an e-paper PCB.

Series of designing substrates to control e-paper with the ESP32-WROVER-B, Previously, I mounted the components. This ti...

2020.11.03

Rose

Electronics

Intel CPLD MAV V 5M160ZE64 evaluation board

The E-INK ED050SC3 and ED060SC4 e-papers used in the e-paper experiment set require 15 signal lines, including the data ...

2020.11.03

Rose

Electronics

MAX V CPLD 5M160 experimental board that sticks to a breadboard. Part 1.

Intel CPLD MAX V SeriesI made an evaluation board with Intel CPLD's MAX V series 5M160 before. The board was outputting ...

2020.11.03 2020.11.08

Rose

Electronics

MAX V CPLD 5M160 experiment board that sticks on the breadboard. Part 2.

In the last article, I designed the MAX V CPLD 5M160 experimental board that sticks to the breadboard and placed an orde...

2020.11.03 2020.11.08

Rose

Electronics

Modify Nintendo Famicom (late model) to video output with FCAV

I'll show you how to modify a late-model Nintendo Famicom to a video output. For the kit version, it is necessary to as...

2020.11.03 2020.11.08

Rose

ElectronicsFamicom

Modify Nintendo Famicom (early model) to video output with FCAV

This is a way to convert Nintendo Famicom (early model) into video output. Before making this modification, the video bo...

2020.11.03 2020.11.08

Rose

ElectronicsFamicom

The kit to convert Nintendo Famicom to video output (FCAV) is now available!

Based on the "FCAV" (Famicom Audio Visual) kit that I made for converting the NES（Nintendo Famicom）to a video output, I ...

2020.11.03 2020.11.08

Rose

Electronics

JLCPCB substrates orders are low cost and delivered quickly!

I've always used "Seeed Studio Fusion PCB" to manufacture my substrates. This is the first time I've ordered a substrat...

2020.11.03

Rose

Electronics

How to modify a Normal Mouse into a Silent Mouse

2020.4.10 ADD How to modify the Apple Magic MouseEnd of ADDHi there. When you click on a computer mouse, it makes a tic...

2020.11.03

Rose

Electronics

Tips for making UV lighting using germicidal bulb

I want to erase the UV-EPROMsI'm thinking of doing a writing experiment on UV-EPROM.UV-EPROM is a very old, old rewritab...

2020.11.03

Rose

Electronics

Display digital microscope images on MacBook for greater efficiency!

These days, electronic components are so small that it's hard to tell if they are being mounted well by the naked eye. ...

2020.11.03

Rose

Electronics

Buy Tescom Low Temperature Convection Oven TSF601 for Reflow! A Nice Temperature Profile!

In the past, I used a hot plate for reflow, but because it was so small, I could only reflow a small amount and the temp...

2020.11.03 2020.11.08

Rose

Electronics

Substrate reflow in convection oven TSF601 is too comfortable to return to hot plate

I bought a convection oven TSF601 for reflow the other day.I actually reflowed the board using this oven. I'm very comfo...

2020.11.03 2020.11.08

Rose

Electronics

The circuit of the Nixie tube IN 14 is built into an alarm clock to create an alarm clock style clock.

The other day, I was able to display the Nixie tube IN-14 by wiring with a breadboard.This time, I would like to build t...

2020.11.03 2020.11.08

Rose

Electronics

"Alarm Clock Style" IN-14 Nixie Tube Clock Completed !

The other day, I created the hardware and incorporated it into the alarm clock.This time, I will be programming and comp...

2020.11.03 2020.11.08

Rose

Electronics

I printed this popular mask with elastic TPU filaments and an Anycubic i3 Mega 3D pulitor.

The mask data, which can be printed on a 3D printer, is available for free.My friend was interested in this mask, so I d...

2020.11.03 2020.11.08

Rose

Electronics

Modification method to silent click Apple Magic Mouse

日本語版はこちらHere is how to modify the click sound of Apple Magic Mouse to be silent.If you modify it, you will get a click s...

2020.11.03

Rose

Electronics

I can now draw handwritten pictures on electronic paper using the Nintendo DS touch panel

The Nintendo DS touch panel can be used with e-paper.Touch PanelI bought a large DSi LL touch panel on Amazon.Since the ...

2020.11.03 2020.11.08

Rose

Electronics

It is possible to read the compressed image from the SD card and play the sequential numbered image on the electronic paper.

I loaded the bitmap images into memory beforehand and animated them on electronic paper like a frame-by-frame cartoon.Th...

2020.11.03 2020.11.08

Rose

Electronics

Trial manufacture of surface mount board using solder paste gun

Solder paste gun（Soldering Gun / Solder syringe?）My old waysMy old way of reflowing surface mount boards. Apply solder p...

2020.11.03 2021.03.17

Rose

Electronics

Until the K155ID1 is controlled by the ESP 32 and the 2 digit Nixie tube IN - 12B is dynamically lit.

I have the substrate for the nixie tube and the K1551 ID 1 for the control IC, I want to control the nixie tube using ES...

2020.11.03 2021.03.17

Rose

Electronics